二轴晶外锥折射的理论分析

从晶体的简正模方程出发,求得在二轴晶体中,当光线沿第二类光轴（光线轴）方向行进时,所对应的电场矢量和电位移矢量,并通过几何证明,验证所有折射光线在晶体内均在同一锥面上。     

Dynamic server assignment policies for assembly‐type queues with flexible servers

We seek dynamic server assignment policies in finite‐capacity queueing systems with flexible and collaborative servers, which involve an assembly and/or a disassembly operation. The objective is to maximize the steady‐state throughput. We completely characterize the optimal policy for a Markovian system with two servers, two feeder stations, and instantaneous assembly and disassembly operations. This optimal policy allocates one server per station unless one of the stations is blocked, in which case both servers work at the unblocked station. For Markovian systems with three stations and instantaneous assembly and/or disassembly operations, we consider similar policies that move a server away from his/her “primary” station only when that station is blocked or starving. We determine the optimal assignment of each server whose primary station is blocked or starving in systems with three stations and zero buffers, by formulating the problem as a Markov decision process. Using this optimal assignment, we develop heuristic policies for systems with three or more stations and positive buffers, and show by means of a numerical study that these policies provide near‐optimal throughput. Furthermore, our numerical study shows that these policies developed for assembly‐type systems also work well in tandem systems. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

换相过程对变抽头六相整流电路的影响

在变抽头六相整流系统中,整流换相和变抽头换相对有效抑制交流侧电流波形畸变起到了重要作用.采用分段解析法给出了考虑换相过程时变抽头六相整流系统的数学模型,得出了交流侧电流波形,并对交流电流进行了傅氏级数分解.通过实验研究,查明了电流正弦性畸变率的变化规律和影响因素,给出了抽头换接器的匝数匹配优化值,为该系统的工程设计提供了重要指导.     

基于RCS序列的助推段弹道导弹识别

在弹道导弹的助推段,通过低分辨率雷达得到RCS序列作为识别的重要信息。由于运动特性和电磁散射特性的差异,弹道导弹在助推段的RCS序列与其他目标相比具有可识别性,但需要对其RCS序列进行处理。基于目标识别技术,详细阐述能从RCS序列中提取出的特征参数,并通过直方图、N点截图等方法给出了直观的反映。最后,将弹道导弹助推段特征与飞机、燃料舱等典型目标进行对比,得到可以作为识别参量的特征参数,并通过类内类间距离验证了有效性。     

Callable products for an implicit time model with dependent demands

Capacity providers such as airlines and hotels have traditionally increased revenues by practicing market segmentation and revenue management, enabling them to sell the same capacity pool to different consumers at different prices. Callable products can enhance profits and improve consumers' welfare by allowing the firm to broker capacity between consumers with different willingness to pay. A consumer who buys a callable product gives the capacity provider the right to recall capacity at a prespecified recall price. This article studies callable products in the context of the model most commonly used in industry, which handles time implicitly imposing fewer restrictions on the nature of randomness compared to the Poisson arrival process favored in academia. In the implicit time model, capacity providers set booking limits to protect capacity for future high-fare demand. Our numerical study identifies conditions where callable products result in significant gains in profits.     

智能反射面辅助的无线网络加权和速率优化设计

针对智能反射面(intelligent reflecting surface, IRS)辅助的无线网络传输设计的目标是通过联合设计基站处的发送波束形成向量和IRS的反射系数,在满足基站发射功率和IRS单位模约束的条件下,使多个地面用户的加权和速率最大化。为了求解非凸的目标函数,提出一种交替优化方法,其中采用黎曼流形梯度(Riemannian manifold gradient, RMG)方法来优化反射系数,使用二分搜索法优化发送波束形成向量。此外,为了降低RMG方法的复杂度,设计了一种智能元素块坐标下降方法。仿真结果验证了所提算法的有效性,并且表明通过优化设计反射系数,IRS可显著提高无线网络的频谱效率。     

顾及噪声影响的GNSS高程序列预测Prophet方法

全球导航卫星系统(global navigation satellite system, GNSS)高程时间序列具有非平稳、非线性、含噪声等特点,在深入研究Prophet预测模型的基础上,针对Prophet预测模型对于趋势信号和周期信号有良好预测效果这一特性,提出一种引入经验模态分解(empirical mode decomposition, EMD)的“降噪—分解—预测”组合GNSS高程时间序列预测方法。该方法先将原始时间序列进行EMD降噪,再对降噪后的序列进行分解预测,最后重构各分量预测信号为最终预测序列。通过对实测高程数据进行研究,实验结果表明：降噪后信号的平均信噪比为10.30dB,能量百分比平均为88.75%;利用所构建的短期预测方法,GNSS高程时间序列预测结果的均方根误差分别平均提升26.41%和14.88%;平均百分比误差分别平均提升18.92%和7.91%,验证了组合预测方法的有效性及实用性。     

潜艇上浮运动数值计算方法的研究与验证

预报潜艇上浮运动是探索研究潜艇上浮运动控制规律以及潜艇安全上浮的前提。就潜艇上浮运动的数值计算方法和计算流程进行了详细介绍,对数值计算方法中的湍流模型及离散格式等进行了优选。基于模型上浮试验结果,对数值计算的不确定度进行了分析且对数值计算结果进行了验证。证明了该数值计算的可靠性,并发现数值计算结果与试验结果很接近,验证了该数值计算方法的可行性,说明该数值计算方法和试验可为潜艇上浮运动的研究提供参考和借鉴。     

A dual criteria sequencing problem with earliness and tardiness penalties

We consider the problem of sequencing n jobs on a single machine, with each job having a processing time and a common due date. The common due date is assumed to be so large that all jobs can complete by the due date. It is known that there is an O(n log n)‐time algorithm for finding a schedule with minimum total earliness and tardiness. In this article, we consider finding a schedule with dual criteria. The primary goal is to minimize the total earliness and tardiness. The secondary goals are to minimize: (1) the maximum earliness and tardiness; (2) the sum of the maximum of the squares of earliness and tardiness; (3) the sum of the squares of earliness and tardiness. For the first two criteria, we show that the problems are NP‐hard and we give a fully polynomial time approximation scheme for both of them. For the last two criteria, we show that the ratio of the worst schedule versus the best schedule is no more than . © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 422–431, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10020     

盲自适应的多用户CDMA阵列接收机

研究了基于CMOE准则的空时多用户检测及其自适应实现。这是一种盲方法 ,不要求任何训练序列 ,能够抑制多址干扰 ,解决远近效应问题。进一步 ,分析了多用户CDMA阵列接收机的性能 ,并且与多用户单天线接收机、单用户阵列接收机以及单用户单天线接收机进行了比较。